Table of Contents
Advertisement
1MRS757105 B
RER601/603
Technical Manual
GUID-360039F8-39C6-42E1-B909-F4234DBAE534 V1 EN
Figure 28:
Serial Gateway settings
The serial gateway can be enabled from the Serial GW menu. When enabled with
the Server operating mode, TCP/IP or UDP connections can be made to the
device's local server port. In the Client operation mode, the gateway sends the
received serial data via TCP/IP to the host (remote IP address or host) or to the
remote host (remote port).
The IEC 60870-5-104 serial device can be connected to the RS1 or RS2 port. The
RS2 serial port can be used either as an RS-232 or an RS-485 type port (IEC
60870-5-104). To enable the serial gateway on the console RS1 port, the console
switch has to be set to "0".
Section 5
RER601/603 Configurator
43
Advertisement
Table of Contents
