5. INSPECTION AND MAINTENANCE
(5) Flowchart when ERROR indicator is lit
Follow the flowchart below if the ERROR indicator lights during operation.
ERROR indicator lit
Connect a peripheral device
Is M9008 ON?
YES
Cause of error of SCPU?
Software error
Reset with the CPU module
RUN/STOP key switch.
Set the RUN/STOP switch to
STOP.
Correct cause of error.
Set the RUN/STOP switch to
RUN.
Does
YES
ERROR indicator
light?
NO
End
NO
Hardware error
Take corrective action.
5 − 13
Cause of error of PCPU?
YES
Refer to error code table for
corrective action.
Is
YES
corrective action
available?
NO
Contact your nearest
Mitsubishi representative with
details.
NO