Mitsubishi Electric A173UHCPU User Manual page 43

1. SPECIFICATIONS OF MOTION SYSTEM COMPONENTS
5)
No. Name
Extension cable
1)
connector
2) Base cover
3) Module connector
4) Unit fixing screw
5) Base mounting hole
6) DIN rail hooks
*1 : Install the supplied blind cap or blank cover (A1SG60) to prevent dust penetrating the empty
connector spaces. Failure to do so can cause malfunctioning.
(c) Extension base unit (A1S65B, A1S68B)
2)
1) 6)
Connects to the signal communications connector on the main base unit with the
extension cable. Remove the connector cover before connecting the extension cable.
A cover for protecting the extension cable connector.
Connectors to mount the power supply module, I/O modules, and special-function
modules.
Install the supplied connector cover or blank cover (A1SG60) to prevent dust
penetrating empty connector spaces.
Screws to fix the unit to the base.
Screw size M4 12.
Slots for mounting the base unit onto the control board panel (for M5 screws)
Hooks to attach to the DIN rail.
A1S65B, A1S68B ...... 2
Application
CAUTION
1 − 31
4)
A1S68B
*1
3)