NEC Univerge SV8100 Features And Specifications Manual page 862

Issue 13.0
Program
Program Name
Number
10-13-01 DHCP Server Mode
10-13-02 Lease Time
10-13-05 Last DHCP Data
10-26-04 IP System Operation Setup –
DT700 Peer to Peer Mode
14-02-23 Analog Trunk Data Setup – Caller
ID Receiving Method
15-02-13 Multiline Telephone Basic Data
Setup – Redial List Mode
15-02-34 Multiline Telephone Basic Data
Setup – Call Register Mode
15-05-28 IP Telephone Terminal Basic
Data Setup – Addition
Information Setup
2 - 828
Description/Comments
Enable/Disable the built-in DHCP
Server.Enable/Disable the built-in
DHCP Server.
Lease time of the IP address to a
client. Press the Transfer Key to
increment to the next setting data.
If 10-13-01 is enabled, this setting
determines if DHCP resource is
enabled or disabled.
Use to Enable (1) or Disable (0)
the Peer to Peer feature for SIP
MLT and SIP IP stations.
 When an ML440 is used in
an AP400 system, this
setting must disabled (Off).
Rings extension before receiving
Caller ID (1) or after receiving
Caller ID (0).
Recommended setting is 0 (Wait
Caller ID).
Select the type of numbers that
are stored in the Redial List –
Internal and External numbers (0)
or External only (1).
For the ML440/G566/G266

extensions this should be set
to 0.
The Caller ID Scroll stores Trunk
calls only (0), or both Internal and
Trunk calls (1).
 For the ML440/G566/G266
extensions this should be set
to 1.
Determines manner in which CID
id presented to an extension.
For the ML440/G566/G266

extensions this should be set
to 1.
IP Multiline Station (SIP) – ML440/G566/G266 with AP400/AP300
UNIVERGE SV8100
Assigned Data
1
0 = Disable
1 = Enable
(default = 0)
Days 0~255
Hour 0~23
Default:
0 day
0 hour
0 = Disable
1 = Enable
(default = 1)
0 = Off
1 = On
(default = 1)

0 = Wait Caller ID
1 = Immediate Ring
(default = 1)
0 = ICM/Trunk
(Extension/Trunk
Mode)

1 = Trunk Mode
(default = 1)
0 = Trunk Mode
1 = Extension/Trunk
Mode

(default = 0)
0 = Do not inform
1 = Inform

(default = 0)
Level
2 3



