NEC Univerge SV8100 Features And Specifications Manual page 805

Hide thumbs Also See for Univerge SV8100:

Table of Contents

UNIVERGE SV8100

Incoming Ring Tone Number

(Trunk Incoming)

(Trunk Incoming)

(Trunk Incoming)

To place an Intercom call:

At multiline terminal, press Speaker.

At single line telephone, lift the handset.

Dial extension number (or 0 for your operator).

Your call may voice-announce or ring the called extension. Dial 1 to change the way your call alerts the called

If the extension you call is busy or does not answer, you can dial another extension without hanging up.

To answer an Intercom call:

If you hear two beeps, speak toward telephone.

Your telephone picks up your voice.

If your telephone rings, lift the handset.

To check the extension data (multiline terminal only):

Press the Help key.

Dial the extension number.

You display shows your telephone extension number, port number and extension/Department Group.

You can also check any other extension numbers information by pressing Help + the extension number.

Press Exit to return the normal time/date display.

Table 2-40 Default Incoming Ringing Tone (Continued)

8Hz Modulation

16Hz Modulation

8Hz Modulation