NEC Univerge SV8100 Features And Specifications Manual page 961

UNIVERGE SV8100
Program
Program Name
Number
15-05-46 IP Telephone Terminal Basic
Data Setup – Doorphone Number
15-07-01 Programmable Function Keys
20-15-07 Ring Cycle Setup – Door Box
Ringing for SLT
32-01-01 Door Box Timers – Door Box
Answer Time
32-01-03 Door Box Timers – Off-Premise
Call Forward by Door Box
Disconnect Timer
32-02-01 Door Box Ring Assignments
32-03-01 Door Box Basic Setup – Chime
Pattern
IP Video Doorphone
Description/Comments
If the port assignment of the
Doorphone is successful, a
Doorphone number is
automatically entered.
Assign a function key for External
Call Forward by Doorphone (Code
54) and Doorphone Access (Code
97).
Define the ringing cycle for Door
Box Ringing for SLT terminals.
Set the time a user has to answer
the Door Box chimes.
Define the conversation time for
an Off-Premise Call Forward by
Door Box call. When this timer
expires, the caller hears busy tone
for 3 seconds (fixed time), and the
call is then disconnected.
Determine which Door Box should
ring which extension by entering
the extension number. Each Door
Box can be programmed to ring up
to 32 extensions and an extension
can be programmed to ring for
multiple Door Boxes.
A minimum of one extension

assigned is required to setup
the IP Video Doorphone.
Set the chime pattern (0~6) for
each Door Box.
Assigned Data
1
0 = Not Assigned
1~8 = Doorphone
Number
(default = 0)
Line Key 1~48
0~99 (Normal Function
Code 751 by default)
 
00 ~ 99
(Appearance Function
Code) (Service Code
752 by default)
Ringing Cycle = 1~13
(default = 8)
0~64800 (seconds)
(default = 30)
0~64800 (seconds)
(default = 60)
Maximum eight digits
(default not assigned)

0 = None
1 = Door Box Ring 1
2 = Door Box Ring 2
3 = Door Box Ring 3
4 = Door Box Ring 4
5 = Door Box Ring 5
6 = Door Box Ring 6
default:
Door Box 1 = 1
Door Box 2 = 2
Door Box 3 = 3
Door Box 4 = 4
Door Box 5 = 5
Door Box 6 = 6
Door Box 7 = 1
Door Box 8 = 1
Issue 13.0
Level
2 3






2 - 927