NEC Univerge SV8100 Features And Specifications Manual page 756

Issue 13.0
Program
Program Name
Number
20-13-06 Class of Service Options
(Supplementary Service) –
Automatic Off-Hook Signaling
(Automatic Override)
Operation
To enable the headset:
1. Plug in the headset in the headset jack on the bottom of the telephone.
2. Program a Headset key (Program 15-07 or SC 751: 05).
You hear a confirmation beep.

To use the headset:
 The Headset key lights when on a call. To disconnect, press the Headset key.
 You can use the handset for calls or respond to voice-announced Intercom calls with the headset plugged in. The
headset only activates when the Headset key is pressed.
Press the Headset key to answer a ringing call.

- OR -
Press the Headset key and then a line key or press Speaker then 9 to make an outgoing call.

- OR -
Press the Headset key to get intercom dial tone.

- OR -
If on a call, press the Headset key to hang up.

2 - 722
Description/Comments
Allow a busy extension to
Manually (0) or Automatically (1)
receive off-hook signals.
UNIVERGE SV8100
Assigned Data
1
0 = Off
1 = On
(default = 1 for
COS 1~15)
Headset Operation
Level
2 3
