NEC Univerge SV8100 Features And Specifications Manual page 340

Issue 13.0
Program
Program Name
Number
20-14-07 Class of Service Options for
DISA/E&M – External Paging
20-14-08 Class of Service Options for
DISA/E&M – Direct Trunk Access
20-14-09 Class of Service Options for
DISA/E&M – Forced Trunk
Disconnect <Not for ISDN
T-point>
20-14-10 Class of Service Options for
DISA/E&M – Call Forward Setting
by Remote via DISA
20-14-11 Class of Service Options for
DISA/E&M – DISA/Tie Trunk
Barge-In
20-14-12 Class of Service Options for
DISA/E&M – Retrieve Park Hold
Operation
To change an extension Class of Service (via Service Code 677):
1. Press Speaker.
2. Dial 677.
3. Dial the extension number you want to change.
You see: MODE1:nn

Press Hold to leave the current value unchanged.
The extension you dial may be set to block your attempt to change their Class of Service.
4. Enter the Day 1 Mode Class of Service for the extension you selected in step 3 and press Hold.
You see: MODE2:nn

Press Hold to leave the current value unchanged.
2 - 306
Description/Comments
Enable/Disable a DISA or tie trunk
caller ability to use the telephone
system External Paging.
Enable/Disable a DISA or tie trunk
caller ability to use Direct Trunk
Access (Service Code 715).
Enable/Disable a tie trunk caller
ability to use Forced Trunk
Disconnect (Service Code 26).
This option is not available to
DISA callers.
Enable/Disable a DISA callers
ability to use the Call Forward
service codes (Program 11-11-01
through Program 11-11-05).
Enable/Disable a DISA or tie trunk
user from using the Barge-In
feature.
Turn Off or On the ability for a
DISA caller to retrieve parked or
held calls.
UNIVERGE SV8100
Assigned Data
1
0 = Off
1 = On
(default = 1 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 1
for
COS 1~15)
Class of Service
Level
2 3





