Figure C-3 Connect Drop List - NEC Electra Elite IPK Installation And Maintenance Manual

Electra Elite IPK
___________________________________________________________________________________
This will allow you to choose between the SPE(M)-U( ) ETU and the LAN PC Pro
Device for configuration. Check the SPE ETU for configuration then click the Setup
button.
___________________________________________________________________________________
SPE Hardware, Installation, and Maintenance Manual
When selecting IP Connection, the SPE Application will not be used and one of the four
COM ports (COM A ~ COM D) can be used. In order to use the four COM ports, the
SPE Application must be running and Direct Connection selected.

Figure C-3 Connect Drop List

Document Revision 1
C - 5