NEC Electra Elite IPK Installation And Maintenance Manual page 55

Document Revision 1
___________________________________________________________________________________
LED Boot Procedure
All LEDs, except for Live (DS3), will light solid during the boot up process. Once the
SPE(M)-U( ) ETU finishes the boot up process all LEDs will go dark momentarily. The
Live (DS3) LED will still be flashing.
Step 4. Remove the SPE(M)-U( ) ETU from the system, and return DIP switch
Step 5. Reinsert the SPE(M)-U( ) ETU back into the system.
S 4 SPE(M)-U( ) ETU C
ECTION
This option is used for advanced technical personnel.
CAUTION: NEC highly recommends that changes not be made to this option.
___________________________________________________________________________________
C - 10
SW4-2 to the OFF Position.
Off = Save Settings (Default)
ONFIGURATION
— CLI
Configuration Examples and MISC
Electra Elite IPK