Table of Contents
Advertisement
30
Copy reduction
If the document to be copied is 10 mm larger than A4 format, the additional length is automatically printed on a
second page. If you wish to prevent a second page from being printed, you can activate the copy reduction
facility. In this case, the copy is reduced to max. 73%. If the reduction scale is not sufficient, a second page is
automatically printed.
The basic setting for copy reduction can be adjusted
. . . . .
STOP
Setting the rings to answer
If your fax machine is configured for automatic reception (Fax, Tel/Fax,
immediately upon being called. Therefore, it is not possible to intercept the call via an optional telephone.
However, you can configure your fax machine to activate - in the event of a call - after a predetermined delay
via the rings to answer function. This function allows you to determine the number of rings (max. 10) after
which the fax machine answers the call.
. . . . .
START
STOP
(see page
15-03
19:56
100%
AUTO RECEIVE
MENU
1.FAX FEATURES
COPY REDUCTION
1.AUTO
15-03
19:56
100%
AUTO RECEIVE
MENU
1.FAX FEATURES
RINGS TO ANSWER
(1-10)
[ 2]
113).
Standby mode
Start the menu
The first menu item is displayed
Select a menu item
Make your selection
1. Copy reduction ON
2. Copy reduction OFF
Select a menu item
Press STOP , return to standby mode
see page
18), it will activate
Standby mode
Start the menu
The first menu item is displayed
Select a menu item
Make your selection
Number of rings
Enter the desired number of rings
confirm with START
Press STOP , return to standby mode
Advertisement
Table of Contents
