Unit Setup Worksheet - Panasonic KX-TDA0480 Installation Manual

2.2.5 Unit Setup Worksheet

The Unit Setup Worksheet is used to record all of the information needed to install and
configure the KX-TDA0480. Some of this information can be transferred from the network
worksheets discussed earlier in this section.
The worksheet has a front and backside. There is also an extension to the worksheet.
The worksheet is divided into sections that correspond to the Unit Setup Wizard and Edit Data
configuration tabs in the Maintenance Console Software.
Worksheet fields with default values are subtitled with these values in parentheses.
Worksheet examples in this section are for the named units in the Sample Network in Section
2.1 Basic Configuration Overview. Also see the network diagrams in Appendices A1 Voice
Over IP Addressing and A2 Numbering Systems.
Once this worksheet is completed, the information is used to logically configure a unit. The
logical parameters are configured using the Maintenance Console Software. Once this
information is entered into the software, the configuration file is uploaded to the unit and is
recorded in unit's internal OFDD.VHO file.
The Maintenance Console Software procedures for entering and uploading unit configuration
data are provided in Section 4 Logical Installation of this document.
This worksheet should be completed for each KX-TDA0480 to be installed in the network.
Care must be taken to assure that the information provided is correct and complete. Inaccurate
or incorrect information may result in problems that are difficult to diagnose once the network
is operational.
Reproduction masters for these worksheets are included in Appendix A8 Worksheet Masters
of this document.
Installation Manual
Planning
27