Panasonic KX-TDA0480 Installation Manual page 31

User PW (PASS_U)
Use the User PW field to record a User access level password.
Passwords may be from 1 to 10 alphanumeric characters long and are case sensitive. Upper and
lower case characters can be freely mixed.
The default User password is user.
In the sample, the User password is entered as user (e.g., the default password).
Maintenance PW (PASS_M)
Use the Maintenance PW field to record a Maintenance access level password.
Passwords may be from 1 to 10 alphanumeric characters long and are case sensitive. Upper and
lower case characters can be freely mixed.
The default User password is mainte.
In the sample, the User password is entered as mainte (e.g., the default password).
Tone
This parameter is irrelevant to the setting of the KX-TDA0480.
Numbering
This parameter is irrelevant to the setting of the KX-TDA0480.
Trunk Data
Use the Trunk Data section of the worksheet to record information needed to configure each of
the active ports on the KX-TDA0480.
• If a port on the KX-TDA0480 is not used, this should be indicated and, in the Maintenance
Console Software, the Clear button should be used to remove all default settings. Failure to
logically disable an unused port can result in calls being lost because they are erroneously
routed to an inactive port.
Port No. (ITRK)
The Port # field indicates the port to be configured (e.g., ports 1 to 2). To the right of each port
are fields for the port's setup parameters. Provide information for each of the unit's active ports.
Installation Manual
Planning
31