Panasonic KX-TDA0480 Installation Manual page 67

Unit Setup Wizard 4 of 6
Use the Setup Wizard screen 4 to either accept the default Maintenance password or change
the Maintenance password.
The default Maintenance password is mainte typed in lower case characters. Be careful to
make a record of any new password that is entered at this time
1.
If the default password is to be used, click on the Use Default check box and proceed to
step 5.
2.
If the Maintenance password is to be changed, select the Password field and type the new
password. To enhance security, an * (asterisk) symbol will be echoed in place of each
character typed.
WARNING
If a password is lost, it cannot be recovered. In the event of a lost password, contact your
maintenance staff, an service office, or an authorised agent.
3.
Select the Confirm password field and retype the new password. To enhance security, an
* (asterisk) symbol will again be echoed in place of each character typed.
4.
Click on the Next button when finished entering information or click on the Cancel button
to exit the Wizard and lose all changes.
If the new password is lost, contact the Customer Support.
*1
Installation Manual
Logical Installation
.
*1
67