Maintenance Schedule 17 - Beta Marine Beta 10 Operator's Maintenance Manual

Maintenance Schedule
Check engine oil level
Check gearbox oil level
Check engine coolant level
Check battery fluid
Check drive belt tension
Ensure raw water inlet
strainer is clear
Check stern gland lubrication
Drain off any water in fuel /
water separator
Change gearbox oil
Check all external nuts, bolts and
fastenings are tight. Check belt
tension. Check for leaks
Change engine oil
Change oil filter
Lubricate keyswitch on control
panel with "vaseline" or WD40
Check coolant "sacrificial" zinc
anode and replace if necessary
- sometimes frequently
Check general condition
Remove heat exchanger tube stack
and replace rubber O-rings
Check sea water pump impeller
and change if worn
Check air cleaner element
and change if required
Change air cleaner element
Change diesel fuel filter
Change gearbox oil
Drain and replace engine
coolant / anti-freeze
Daily or After
every 8hrs first
running 25hrs
18
After Every
first 150hrs with
50hrs shallow sump
See separate gearbox manual
Every Year Every
or 250hrs 750hrs
if sooner