3. SETUP
The standard setup procedure is shown below. Set up the equipment accordingly.
Unpack and check that all the attachments are included.
Remove the transport protective materials (2 places.)
A large number of discs can be loaded quickly(bulk load).
1
*
Please have your dealer or nearest JVC service center perform this task.
2
*
Start
Open the transport lock
Mount the optional carrier
Install the drive units
Initial setup of SCSI-ID No., etc.
Connect the power cord and cables
Execute the automatic drive detection mode.
Load discs in the magazines
Turn the power switch on.
Completion
Proceed to the host computer setup
2
*
.
1
*
P.10
P.11
P.21
P.12
P.13
P.22
P.18, 25
9