Table of Contents
Advertisement
MC-8100U
1
Demonstration Mode
(1) Purpose
This mode is used to perform a demonstration of the CD/DVD changer operation.
(2) Start
While pressing the "ENTER" key and the numeric key "3" simultaneously, turn the power ON.
* It is not necessary to set the discs on each tray. (A disc presence check is not performed.)
(3) Operation
Repetition of crossing operation.
Disc Access (MC-8100U: when drives 1 and 2 are connected)
• Crossing Operation
Count
"100" → DR1
0001
"001" → DR2
0002
"099" → Mail slot
0003
"002" → DR1
0004
"098" → DR2
0005
"003" → Mail slot
0006
"051" → Mail slot
0099
"050" → DR1
0100
(4) Operation Stop
When the numeric key "3" is pressed during demonstration, the operation stops after the disc being accessed is returned to the
original magazine.
(5) Operation Restart
When the "ENTER" key is pressed in the demonstration-stop mode, the operation restarts from the tray next to the one being
accessed the previous time.
2
Carrier Upper/Lower Limit Check Mode
(1) Purpose
Checks whether the tray loading/ejecting operation is possible or not at the upper and lower limits of the address slits.
(2) Start
While pressing the "ENTER" key and the numeric key "4" simultaneously, turn the power ON.
* It is not necessary to set the discs on each tray. (A disc presence check is not performed.)
(3) Operation
Accesses to the 2nd address from the top (Tray No. 49 in the magazine) and the 2nd address from the bottom (Tray No. 02 in the
magazine), drive and the mail slot in order twice for each. Searches for the lower limit at the 1st cycle and for the upper limit at the
2nd cycle as a target.
Operation Sequence (MC-7100U: When drives 1 and 2 are connected)
→
1) Address 99
Drive 1
→
2) Address 52
Drive 2
→
3) Address 49
Address 49 (Lower limit) (When drive 3 exists: To Drive 3)
→
4) Address 02
Address 02 (Lower limit) (When drive 4 exists: To Drive 4)
→
5) Address 99
Address 99 (Lower limit)
→
6) Address 52
Address 52 (Lower limit)
→
7) Address 49
Mail Slot
→
8) Address 02
Address 02 (Lower limit) (When printer exists: To Printer)
9) Checks for upper limit for 1) to 8)
(4) LCD display in upper/lower limit check mode
R U N N I N G
2-11
Access Address
→ "100"
→ "001"
→ "099"
→ "002"
→ "098"
→ "003"
→ "051"
→ "050"
→
Address 99 (Lower limit)
→
Address 52 (Upper limit)
→
Address 49 (Lower limit)
M O D E
4 – 0 9 9
Tray No. being accessed. However, An "END" warning
appears when finished.
Advertisement
Table of Contents
