Table of Contents
Advertisement
9-2. Loading/replacing the discs
CAUTION
• When loading discs directly into the magazine trays without using the mail slot, be careful not to damage the magazines
and trays.
• A disc may become impossible to write/read due to dust, fingerprints, scratches, etc. adhering to the disc surface. Please
handle it carefully.
• Take special care in handling the DVD-RAM discs because they are extremely vulnerable to scratches and contamination.
1.
Eject a magazine. ( a See "9-1. Ejecting/loading the
magazines" on page 24.)
2.
Unlock the tray lock corresponding to the tray to be used.
( a See "2-3. Magazine numbers, tray numbers, disc
numbers" on page 8.)
3 0
2 1
3.
Pull out the tray.
4.
Place the disc on the tray.
5.
Push in the tray and lock the tray lock.
6.
Load the magazine in the changer. ( a See "9-1. Eject-
ing/loading the magazines" on page 24.)
Label surface
(With a single-sided disc)
CAUTION
(1) Place the disc correctly on the disc tray so that it does
stay in the guide section of the disc tray.
(2) To prevent projection of a tray or incomplete locking
of the tray lock, align the edges of all the trays in the
magazine by slightly pushing them inward from.
(3) Always handle the magazine the correct way.
Holding or placing a magazine upside down or on its
side may cause the discs to slip out of position and
result in malfunction.
Magazines
25
Advertisement
Table of Contents
