Access Counter Clearance - JVC MC-8100U Service Manual

(5) During upper/lower limit check mode, the phase difference of the Up/Down rotary encoder is automatically checked and its result
is shown on the LCD display.
R U N N I N G
3 5 : O K
Phase difference (%)

2.2.2 Access Counter Clearance

1. Set to display the contents shown on page 30 of the instruction manual.
2. Hold the SELECT key until the unit to be cleared appears in the 1st line.
3. With the unit counter to be cleared shown on the 1st line, hold the ENTER key for more than 5 seconds.
2.2.3 Manual Operation
M A N U A L
S E L E C T : 0 0
M A N U A L
Pressing numeric key 1 - 5 activates the corresponding operation
(refer to the table on the this page).
1
Carrier Manual Operation
· Carrier upward operation (SUBMODE = 00)
Function
Upward normal move
Upward low-speed move
Upward 1-slit move toward left
Upward 1-slit move toward right
Upward 1-step advance
· Carrier downward operation (SUBMODE = 01)
Function
Downward normal move
Downward low-speed move
Downward 1-slit move toward left
Downward 1-slit move toward right
Downward 1-step advance
· Tray lock/release operation (SUBMODE = 02)
Function
Left tray lock release
Tray lock initial
Right tray lock release
M O D E
4 – E N D
"NG" appears when a failure occurs.
M O D E
Select SUBMODE using the numeric keys
After selecting, press ENTER key
M O D E
0 0
Numeric key
1
During key is ON (Condition: Tray lock initial position)
2
During key is ON (Condition: Tray lock initial position)
3
Each time key is ON (Condition: Tray lock initial position)
4
Each time key is ON (Condition: Tray lock initial position)
5
Each time key is ON (Condition: Tray lock initial position)
Numeric key
1
During key ON, until lower limit sensor is reached (Condition: Tray lock initial position)
2
During key ON, until lower limit sensor is reached (Condition: Tray lock initial position)
3
Each time key is ON (Condition: Tray lock initial position)
4
Each time key is ON (Condition: Tray lock initial position)
5
Each time key is ON (Condition: Tray lock initial position)
Numeric key
1
During key ON, until left tray lock is released
2
Each time key is ON
3
During key ON, until right tray lock is released
Details
Details
Details
MC-8100U
2-12