Removing The Side Panel L - JVC MC-8100U Service Manual

2.1.7 Removing the Side Panel L

1. Remove the eight screws
When removing the side panel, unscrew while holding the
side panel with your hands. (To prevent the panel from drop-
ping.)
2.1.8 Removing the Side Panel R
1. Open the door. (Refer to 2.1.2).
6
2. Remove the four screws
5
to remove the side panel.
.
6
2.1.9 Removing the Rear Panel
1. Remove the six screws
5
2.1.10 Removing the Power Supply Unit
1. Remove the side panel L. (Refer to 2.1.7.)
2. Disconnect the connector cables connected to the power sup-
ply unit.
3. Remove the two screws
4. Slightly loosen the two screws
supply unit by sliding it upward.
MC-8100U
7
.
7
9
8
8
.
9
, and remove the power
2-6