Fujitsu Docomo F-07F Instruction Manual page 124

Upper slot : Command
Lower slot : Example
AT+CNUM
AT+CNUM
+CNUM : ,"090XXXXXXXX",
129
OK
AT+COPS=<n>,2,
*2
<oper>
AT+COPS=0
OK
AT+CPAS
AT+CPAS
+CPAS : 0
OK
AT+CPIN="<pin>",
"<newpin>"
AT+CPIN="0000"
OK
*1
AT+CR=<n>
AT+CR=0
OK
*1
AT+CRC=<n>
AT+CRC=0
OK
*1
AT+CREG=<n>
AT+CREG=0
OK
*1
AT+CUSD=<n>,"<str>"
AT+CUSD=0,"012345678"
OK
*1
AT+FCLASS=<n>
AT+FCLASS=0
OK
AT+GCAP
AT+GCAP
+GCAP : +CGSM,+FCLASS,
+W
OK
Display FOMA terminal's own phone number in the "+CNUM : ,"<number>",<type>"
format.
number : Own phone number (With 2in1, display Number B in B mode or Number A in
other mode)
type=129 : International access code + not included
type=145 : International access code + included
Set search method for network operator to connect.
n=0 : Auto (default) n=1 : Manual
When n=1 is set, set PLMN Number in hexadecimal value for <oper>.
AT+COPS? : Display current settings
Display whether FOMA terminal can send and receive AT commands to external devices
in "+CPAS : <n>" format.
n=0 : Possible n=1 : Impossible
n=3 : Possible and receiving
n=4 : Possible and communicating
AT+CPAS=? : Display a list of displayable values
Enter these commands for entering PIN1/PIN2 codes or PUK with PIN1 code ON. To enter
PUK, enter new PIN1/PIN2 code in <newpin>. Even if entering in <newpin> when entry of
PIN1/PIN2 code is request, PIN1/PIN2 code cannot be changed.
n=READY : Entry of code not requested
n=SIM PIN2 : Entry of PIN2 code waited
n=SIM PUK : Entry of PUK waited due to failure in unblocking PIN1 code
n=SIM PUK2 : Entry of PUK waited due to failure in unblocking PIN2 code
AT+CPIN? : Display the code currently requested in "+CPIN : <n>" format
Set whether to display the communication type before "CONNECT" is displayed during
connection.
n=0 : Not display (default)
n=1 : Display the communication type in the "+CR : <serv>" format
serv=GPRS : Packet communication
serv=AV64K : 64K videophone
AT+CR? : Display current settings
Set whether to use +CRING result codes when communication is received.
n=0 : Not use (default)
n=1 : Use "+CRING : <type>" result codes
type=GPRS "PPP",,,"<APN>" : Packet communication
type=SYNC : 64K data communication
type=AV64K : 64K videophone
AT+CRC? : Display current settings
Set whether to report network service registration status (Within/Out).
n=0 : Not notified (default)
n=1 : When the terminal is moved from Within service area to Out of service area or vice
versa, the status is reported in the "+CREG : <stat>" format.
stat=0 : Out of sound service area
stat=4 : Unknown
stat=5 : Within sound service area (during international roaming)
AT+CREG? : Display the current settings and status in the "+CREG : <n>,<stat>" format
AT+CREG=? : Display a list of assignable values
Set Additional service (Register USSD) of Network Services. Enter Service code provided
by DOCOMO in <str>.
n=0 : Not answer mid result (default)
n=1 : Answer mid result in "+CUSD : <m>, "<str>",0" format
m=0 : Information not requested
AT+CUSD? : Display current settings
Set communication type supported by FOMA terminal.
n=0 : Only data supported (fixed value)
AT+FCLASS? : Display current settings
AT+FCLASS=? : Display a list of assignable values
Display the range of AT commands supported by FOMA terminal in the "+GCAP : <n>"
format.
n=+CGSM : Support GSM commands (including the case for supporting a part)
n=+FCLASS : Support +FCLASS commands
30
Description
n=3 : No mapping
AT+COPS=? : Display a list of assignable values
n=2 : Status unknown
n=SIM PIN : Entry of PIN1 code waited
serv=SYNC : 64K data communication
AT+CR=? : Display a list of assignable values
AT+CRC=? : Display a list of assignable values
stat=1 : Within sound service area
m=1 : Information requested
AT+CUSD=? : Display a list of assignable values
n=+W : Support +W commands