Fujitsu Docomo F-07F Instruction Manual page 126

64K data communication
Value
1 Specified number does not exist.
16 Normal disconnection.
17 Communication is impossible because remote device is busy.
18 You made a call but did not receive a response within the specified time.
19 The remote device is called but no response.
21 The remote device rejected incoming calls.
63 The service and option of the network are not valid.
65 Unavailable processing speed was specified.
88 You made a call to a terminal or received a call from a terminal with different terminal properties.
Error messages list
No. Text display
10 SIM not inserted
15 SIM wrong
16 incorrect password
100 unknown
Supplement to AT command
<cid> is the number used to control dialup connection (APN) for packet communication to be registered
in FOMA terminal. "1-10" can be registered in FOMA terminal.
By default, the following APNs are registered in cid1, 3, 4.
cid1 : mopera.net (APN mopera U, PPP connection)
cid3 : mopera.net (APN mopera U, IP connection)
cid4 : mpr.ex-pkt.net (APN mopera U, PPP connection, 128K communication)
<APN> is an optional string for each connection to indicate dialup connection.
Command name : +CGDCONT=[parameter]
Outline
Set dialup connection (APN) for packet communication.
Format
+CGDCONT= [<cid> [,"<PDP_TYPE>" [,"<APN>"] ] ]
Parameter description
<cid> : 1-10
<PDP_TYPE> : IP or PPP
<APN> : Optional
Example of execution
The command used to register an APN named "abc" for PPP connection (when <cid>=5).
AT+CGDCONT=5,"PPP","abc"
OK
Operation performed when parameter is omitted
AT+CGDCONT= : Return all <cid> to the setting by default.
AT+CGDCONT=<cid> : Return the specified <cid> to the setting by default.
AT+CGDCONT? : Display current settings.
AT+CGDCONT=? : Display a list of assignable values.
Description
UIM is not set.
Other than DOCOMO SIM (IC card equivalent to UIM) is inserted.
Incorrect password
Unknown error
32
Description