Fujitsu Docomo F-07F Instruction Manual page 22

Waterproofness/Dustproofness
F-07F provides waterproofness of IPX5
and dustproofness of IP5X
the external connection jack cap and installing
the back cover in a locked state.
*1 IPX5 means that a phone keeps functioning after
applying a jet flow of 12.5 L/min. from every
direction from a distance of approximately 3 m for at
least 3 minutes using water nozzle in 6.3 mm inner
diameter.
*2 For F-07F, IPX8 means that a phone keeps
functioning after F-07F is slowly submerged to depth
of 1.5m in static tap water at room temperature, left
there for 30 minutes and then taken out, and the
mobile phone keeps shooting still images or moving
pictures in approximately 30 minutes in static tap
water at room temperature.
*3 IP5X means a protection degree that a phone keeps
functioning and safety after it is placed in a device
with dust in diameter 75
agitated and then taken out.
✜
What you can do with waterproofness
of F-07F
You can talk or watch 1Seg programs without
using an umbrella in the rain (for rainfall of 20
mm or less per hour).
- When your hands or FOMA terminal are wet,
avoid installing/removing the back cover or
opening/closing the external connection jack
cap.
You can also shoot still images and moving
pictures in the pool depth of 1.5 m.
- Do not perform other operations underwater
than shooting still images and moving
pictures.
- If you put the terminal in water of swimming
pool, be sure to have it within 30 minutes.
20
*1 *2
, IPX8
*3
with firmly closing
or less for 8 hours,
- If FOMA terminal gets wet with water from the
swimming pool or soak in water of swimming
pool, wash it in tap water in room temperature
( P20) and drain water in specified procedure
( P22).
You can wash FOMA terminal in tap water in
room temperature.
- Holding the external connection terminal cap
not to open, wash the terminal with tap water
without rubbing hard.
- Do not apply water flow stronger than allowed
( P20).
- Do not use brush, sponge, soap, detergent, etc.
- If mud or soil is adhered to the terminal, do not
open or close the terminal. Eliminate the dirt
first by shaking several times in tap water of
wash-basin and then wash the terminal with
running water.
- Drain water in specified procedure ( P22)
after washing.
You can use FOMA terminal in a bathroom.
- Do not put the terminal in the bathtub. Do not
use the terminal in hot water. May cause
malfunction. If you should fall the terminal into
the bathtub, immediately pick it up to drain
water in specified procedure ( P22).
- Never put FOMA terminal in hot spring water
or water containing soap, detergent or bath
powder. In case the terminal gets wet with
water other than tap water, wash it in the
procedure above.
- You can use the terminal within 2 hours in a
bathroom where the temperature ranges
between 5 and 45 and humidity ranges
between 45 and 99%.