Data Communication - Fujitsu Docomo F-07F Instruction Manual

Data Communication

There are 3 communication modes available by connecting FOMA terminal and a PC : data
transfer (OBEX™ communication), packet communication and 64K data communication.
To make packet communications or 64K data communications or edit data such as the phonebook using
a PC connected, downloading the software from NTT DOCOMO website, installation and various settings
are required.
When performing packet communication overseas, use IP connection (packet communication is
unavailable with PPP connection). 64K data communication cannot be used overseas.
FOMA terminal does not support FAX communication or Remote Wakeup.
❖
Data transfer (OBEX™ communication)
You can send and receive data such as image, music, phonebook or mail etc. to/from other FOMA terminals
or PCs etc.
Transferable data varies depending on transfer method. For data that can be transferred by each transfer
method, see "Instruction manual (detailed version) (in Japanese only)" (in pdf format) of the FOMA
terminal.
❖
Packet communication
You can connect to the Internet and perform data communication (packet communication).
Packet communication charges are based on the amount of data sent and received. No communication
charges are required when no data are exchanged even if you are connected to the network. Therefore,
sending/receiving data as needed while remaining connected to the network is possible.
High-speed packet communication can be performed at a maximum reception speed of 7.2Mbps and a
maximum transmission speed of 5.7Mbps by using access points that support FOMA packet
communication such as mopera U of DOCOMO's Internet connection service. Best effort method which the
actual communication speed varies with the environment and the rate of congestion offers.
Note that communications of large-size data such as viewing websites containing images and downloading
will require high charges.
* The communication speed may be slower when connecting out of FOMA HIGH-SPEED area, connecting to access points
incompatible with HIGH-SPEED, or using devices incompatible with HIGH-SPEED.
* For Bluetooth connection, though the communication speed of FOMA terminal is equal to HIGH-SPEED, communication
may not be performed by maximum speed because the communication speed between Bluetooth devices has limits.
* Maximum speed of reception 7.2Mbps and transmission 5.7Mbps are the values in technical standards, thus they are not
indicated actual communication speed. Actual communication speed varies by the network congestion or environment of
communication.
Infrared communication
iC transmission
Bluetooth communication
USB cable connection
microSD card
DOCOMO keitai datalink
1