Table 1.109 Setting And Display Items In The [Snmp Community] Window; Table 1.110 Buttons In The [Snmp Community] Window - Fujitsu PRIMEQUEST 2000 Series Tool Reference

MMB Web-UI (Web User Interface) Operations
1.5 [Network Configuration] Menu

TABLE 1.109 Setting and display items in the [SNMP Community] window

Items
System Name
Displays the SNMP system name.
System Location
Sets the System Location of SNMP.
You can use alphanumeric characters, spaces, and the following characters:
! " # $ % & ' ( ) = - ^ ~ ¥ @ ` [ ] { } : ; * + ? < > . , / _ |
However, the following restrictions apply:


System Contact
Sets the System Contact for SNMP.
The characters that can be specified for System Contact are the same as those for
[System Location].
Community/User
Sets the SNMP Community string for SNMP v1 and v2.
Alternatively, it sets the user name for SNMP v3.
You can use alphanumeric characters and the following characters:
! " # $ % & '( ) * + , - . / @ [ ] ^_ ` { | } ~
However, the character string cannot begin with " (double quotation mark), # (number
sign), ' (single quotation mark), or ` (back quotation mark).
IP Address/MASK 

SNMP Version
Sets the SNMP version. (1, 2, 3)
Access
Sets whether to permit only reading or both reading and writing.


Auth
Sets the security level.
You can specify this only if [3] is selected for [SNMP Version].



With [1] or [2] selected for [SNMP Version], this item is grayed out and disabled. In
this case, the only available security level is noauth.

TABLE 1.110 Buttons in the [SNMP Community] window

Buttons
Apply Sets the specified information.
Cancel Restores the original information and does not set the specified information, such as the
community or the IP address permitted access.
(1) Menu Operation
[Network Configuration] - [SNMP Configuration] - [Community]
(2) Window Operations
Configuring information such as the community
-
1. Enter information such as the community, the IP address permitted access, the SNMP version,
the access permission, and the authentication. Then, click the [Apply] button.
This sets the entered information.
Deleting information such as the community
-
1. Delete the community and the IP address permitted access. Then, click the [Apply] button.
This clears the specified information.
The character string cannot begin with a space or #.
The character string cannot end with a space.
To specify an IP address: Enter the IP address.
To specify a subnet: Enter the subnet and mask.
Read Only
Read Write
noauth: Do not use the authentication function.
auth: Use the authentication function.
priv: Use the authentication function and "privacy" function (data encryption).
245
Description
Description
CA92344-0539-04