Figure 1.62 [Extended Partition Configuration Of Sb Resources] No Extended Partitioning Window - Fujitsu PRIMEQUEST 2000 Series Tool Reference

MMB Web-UI (Web User Interface) Operations
1.3 [Partition] Menu for PRIMEQUEST 2400E2/2800E2/2400E/2800E

FIGURE 1.62 [Extended Partition Configuration of SB Resources] no Extended Partitioning window

(1) Menu Operation
[Partition] - [Partition#n Extended Partition Configuration] - [SB] button
(2) Window Operations
1. When there is change in "Partition Name", change in "CPU CORE" and "Memory GB" allocation,
change in "Memory EXCL" and "SKT Binding" option, change in "USB1", "VGA/ USB2/ Remote KVMS",
"PCI Slot" allocation, click the [Apply] button after changing each setting.
And then, confirmation dialog box appears.
2. Click the [OK] button.
The allocation of the resource is changed.
3. Click the [Apply] or [Cancel] button.
Return to [Extended Partition Configuration of SB Resources].
[Message]
This section describes the messages to be displayed on this window.
Message Number
E_000544
W_00545
W_00589
I_00604
For details on the messages displayed on the window, see
(CA92344-0540).
Unable to change Extended Partitioning Configuration to Partition#%aa because this
partition is under maintenance.
Unable to change Extended Partitioning Configuration to Partition#%aa because this
partition is power on.
Unable to change Resources, because this partition is powered on.
Setting completed.
!!! CAUTION!!!
Assignment of "VGA/USB2/rKVMS" cannot be changed if the Extended Partition is
powered on.
Please release "VGA/USB2/rKVMS" after the operation.
Note:
"IP Address", "Video Redirection" and "Virtual Media" for all Extended Partitions must
be enabled in "Partition -> Console Redirection Setup" menu.
179
Message
PRIMEQUEST 2000 Series Message Reference
CA92344-0539-04