System Power Control] Window; Figure 1.12 [System Power Control] Window; Table 1.34 Display Items And Setting Items In [System Power Control] Window - Fujitsu PRIMEQUEST 2000 Series Tool Reference

MMB Web-UI (Web User Interface) Operations
1.2 [System] Menu for PRIMEQUEST 2400E2/2800E2/2400E/2800E

1.2.8 [System Power Control] window

In [System Power Control] window, power of the entire PRIMEQUEST 2000 series system can be controlled.
Remarks
·
Please shutdown the OS for the partition in which Windows is installed. In case of emergency such as,
no response from the system, cut the power supply using Power Off (Force Power Off) of MMB.
·
In case of following condition, confirm the contents by referring to "11.2 Troubleshooting" of
PRIMEQUEST 2000 Series Administration Manual
contact your sales representative or sales representative.
Confirm the model name and serial number shown on the label affixed on the main unit and report it.
Moreover, do not [Reset] or [Force Power Off] the partition till the error is solved.
When [Power off], [Reset], [Force Power Off] and shut down of partition is done by operating
-
system, and if the state of each component on the MMB Web-UI screen is displayed in the state in
which processing does not end even for a long time, Part Number and Serial Number are
displayed as "Read Error".

TABLE 1.34 Display Items and Setting Items in [System Power Control] Window

Items
Power on all partition(s)
Power off all partition(s)(all
partition(s)will be
automatically shutdown)
Force Power Off

FIGURE 1.12 [System Power Control] Window

Turns on the power of all the partition(s).
If the status, in which only the power of the chassis is ON, is selected, the
power of all partitions is turned on.
Shuts-down all the partitions and turns off the power of the chassis.
Turns off the power supply without shutting down the running operating
system on the partition.
(CA92344-0537). If the error could not be solved,
Description
92
CA92344-0539-04