Table 1.120 Buttons In The [Create Selfsigned Certificate] Window - Fujitsu PRIMEQUEST 2000 Series Tool Reference

MMB Web-UI (Web User Interface) Operations
1.5 [Network Configuration] Menu

TABLE 1.120 Buttons in the [Create Selfsigned Certificate] window

Buttons
Create Selfsigned Certificate
Cancel
(1) Menu Operation
[Network Configuration] - [SSL] - [Create Selfsigned Certificate]
(2) Window Operations
1. Before creating a selfsigned certificate, confirm that [HTTPS] is set to [Disable] in the [Network
Protocols] window.
2. Specify information such as the length of the secret key and the ISO country code of the owner. Then,
click the [Create Selfsigned Certificate] button.
A confirmation dialog box appears.
3. Click the [OK] button in the dialog box.
This creates the selfsigned certificate. It takes a few minutes to create. When creation is completed,
the window is updated. This updated window displays the message "SSL certificate status: A signed
certificate is installed."
[Message]
The following table lists the messages displayed in this window.
Message Number
I_00013 Setting completed.
W_00426 Invalid values specified.
I_00444 Previous private key will be overwritten with new private key.
Are you sure?
For details on the messages displayed on the window, see
(CA92344-0540).
Creates a selfsigned certificate.
Cancels the creation of the certificate.
257
Description
Message
PRIMEQUEST 2000 Series Message Reference
CA92344-0539-04