Create/Edit/Delete User - Fujitsu 1FINITY L100 User Manual

System Administration
User Administration
Table 47
Groups and Permission Levels
Group Role
Level-1 Read-Only User
Level-2 PM Operator
Level-3 Equipment Operator
Level-4 Super User
Level-5 System Operator
Level-6 Security Operator
Level-7 Crypto-User
Level-8 Crypto-Officer
6.7.4

Create/Edit/Delete User

Users can be created and edited with the following CLI command, where <username> conforms to username
rules, <password> conforms to password rules, and <level-1...level-6> declares the user group.
Command:
% set users user <username> password <password> group <level-1...level-6>
The maximum number of users that can be created is 100.
In the YANG model, each user is a child node of the users node.
Remember: In configuration mode (command prompt ends with %), changes are made to the
candidate configuration and do not affect in the running configuration until a successful commit or
commit confirm command is entered.
·
Release 19.1.1 Issue 1.1, May 2021
Access Privilege Description
Read-only access privileges, including retrieving alarm and PM information
Note: Level-1 cannot access security- or encryption-related information.
Level-1 access privileges, plus can reset PMs
Level-2 access privileges, plus access to provision equipment and interfaces
Full access to system, provisioning, security, and crypto-encryption functions
Level-3 access privileges, plus access to system functions
Note: Level-5 cannot access security and crypto-encryption functions.
Note: Level-5 cannot add, change, or delete users.
Security access privileges only, plus can add, change, or delete users
Note: Level-6 cannot access system, provisioning, and crypto-encryption
functions.
Provision data-encryption interfaces and read the encryption status on the
encryption-enabled interfaces
Note: Level-7 only applies to products that support data encryption.
Level-7 access privileges, plus can create crypto-user, crypto-officer, and can set
global encryption policy
Note: Level-8 only applies to products that support data encryption.
Note: A Level-4 user must create the first Level-8 user account. Additional
Level-8 user accounts can be created by a Level-4 or Level-8 user.
226
Fujitsu and Fujitsu Customer Use Only