Replace Blade In Housing - Fujitsu 1FINITY L100 User Manual

402
System Maintenance
Equipment Replacement
Step 36
Plug in all LCN SFP (to the Main and tributary blades) and connect the interconnect LAN cables.
Step 37
List the USI of the tributary blade.
Command:
% show shelf-prov-mode-blades
Output:
USI LBFJTU011725463R110100xxx shelf-id 0
Step 38
Set the desired shelf ID on the tributary blade manually.
Command:
% request set-shelf-id USI LBFJTU011725463R110100xxx shelf-id #
Step Result:
The tributary blade restarts and autoprovisions with the new shelf ID.
Step 39
After restart, retrieve the tributary blade information.
Commands:
% show inventory | tab
% show eqpt shelf #
✓
This task is complete.
8.3.6

Replace Blade in Housing

Prerequisites:
■ An appropriate ESD wrist strap worn by user and properly grounded to avoid ESD damage during installation
or removal
■ All fibers removed from the blade and appropriately labeled
■ If used, all RJ-45 cables removed from the blade and appropriately labeled
■ If used, all PIUs removed from the blade
■ A recent database backup for the blade is available
■ Screwdriver set (including straight-slot and Phillips head)
· Fujitsu and Fujitsu Customer Use Only
Release 19.1.1 Issue 1.1, May 2021