Telemetry, Streaming; Ztp - Fujitsu 1FINITY L100 User Manual

System Administration
System Feature Administration
Set NE Management Mode
Command:
% set system neMgmtMode <mgmtmode>
Parameter Value
mgmtmode <Bridge, MixMode, Router>
Show NE Management Mode
Command:
% show system neMgmtMode
6.6.4

Telemetry, Streaming

Note: For more detailed streaming telemetry information, refer to 1FINITY Telemetry User Guide, available on
the Fujitsu Partners website, https://partners.fnc.fujitsu.com/documentation.
Enable Streaming Telemetry
Streaming telemetry must be configured by the user via an XML configuration file loaded to the NE. The
telemetry feature checks the configuration file on system start-up and if the file is not found, telemetry service
shuts down.
By default, streaming telemetry is disabled.
Command:
> request telemetry action <telemetry-action> config-file <telemetry-filename>
Command Example:
> request telemetry action configure config-file /var/ftp/
telemetry.tar.gz
Disable Streaming Telemetry
Command:
> request telemetry action delete
6.6.5

ZTP

·
Release 19.1.1 Issue 1.1, May 2021
Description
Bridge—Layer 2 bridging runs between management interfaces.
MixMode—Routing runs between all management interfaces,
except LCN1 and LCN2 which are bridged.
Router—Routing runs between management interfaces.
218
Fujitsu and Fujitsu Customer Use Only