Install Power Cables - Fujitsu 1FINITY L100 User Manual

Equipment Installation

Install Power Cables

4.12
Install Power Cables
The following links lead to related information:
Power Specifications
Install Power Terminal Adapter
Remove Power Cables
Tools required:
■ Power terminal adapter attached to the blade
■ Screwdriver set (including straight-slot and Phillips head)
■ DMM
■ Terminating cable lugs bent at 90 degrees
Danger: Make sure both A and B power feeds are turned off, at the source, before starting this procedure.
Use properly insulated tools and perform all safety precautions in accordance with local safety practices
when working on or around power terminals, power cables, and power connectors. Contacting power
terminals, uninsulated conductors, cable wiring, or any connector that could be part of a live electrical
circuit can result in death or serious personal injury.
Attention: This procedure is not applicable if using the 1FINITY Housing option.
Step 1
If not already done, remove the protection cover from the power terminal adapter.
·
Release 19.1.1 Issue 1.1, May 2021
141
Fujitsu and Fujitsu Customer Use Only