Fujitsu 1FINITY L100 User Manual page 72

Unit Description
L110 Blade
Connector Descriptions
Table 21
Connector and Function
Connector Connector Type
LCN1 SFP cage
LCN2 SFP cage
LCN3 SFP cage
LCN4 SFP cage
LMP RJ-45
MAINT RJ-45
UTLP RJ-45
Note: The RST push-switch is used to activate a CPU WARM reset.
·
Release 19.1.1 Issue 1.1, May 2021
Location Function
Front panel 100Base-T/1000Base-T electrical or 1000Base-SX/
LX10/EX/ZX optical connection to DCN Cloud
Note: The LCN1 port cannot be used simultaneously
with the UTLP port.
Front panel 100Base-T/1000Base-T electrical or 1000Base-SX/
LX10/EX/ZX optical connection to DCN Cloud
Note: The LCN2 port cannot be used simultaneously
with the UTLP port.
Front panel 100Base-T/1000Base-T electrical or 1000Base-SX/
LX10/EX/ZX optical interblade communication
connection for blades within one ROADM system
Note: The LCN3 port cannot be used as a
communication connection to another blade or
device outside the virtual NE.
Front panel 100Base-T/1000Base-T electrical or 1000Base-SX/
LX10/EX/ZX optical interblade communication
connection for blades within one ROADM system
Note: The LCN4 port cannot be used as a
communication connection to another blade or
device outside the virtual NE.
Front panel 100Base-T/1000Base-T LMP connection for craft
interface to WebGUI
Rear panel 100/1000Base-T connection of maintenance port
Front panel Future use
72
Fujitsu and Fujitsu Customer Use Only