Remove Power Cables - Fujitsu 1FINITY L100 User Manual

Equipment Removal

Remove Power Cables

9.5
Remove Power Cables
The following links lead to related information:
Install Power Cables
Prerequisites:
■ Power to the blade has been turned OFF
■ Screwdriver set (including straight-slot and Phillips head)
■ DMM
Danger: Make sure both A and B power feeds are turned off, at the source, before starting this procedure.
Use properly insulated tools and perform all safety precautions in accordance with local safety practices
when working on or around power terminals, power cables, and power connectors. Contacting power
terminals, uninsulated conductors, cable wiring, or any connector that could be part of a live electrical
circuit can result in death or serious personal injury.
Attention: This procedure is not applicable if using the 1FINITY Housing option.
Step 1
If not already done, remove the protection cover from the power terminal adapter.
Figure 172
Removing Protection Cover
·
Release 19.1.1 Issue 1.1, May 2021
Wiring to Power Terminal Adapter
Protection Cover and
Attachment Screws
433
Fujitsu and Fujitsu Customer Use Only