Provision L110 Tributary Shelf, Ports, And Slots - Fujitsu 1FINITY L100 User Manual

195
Initial System Turn Up

Provision L110 Tributary Shelf, Ports, and Slots

5.13
Provision L110 Tributary Shelf, Ports, and Slots
Step 1
Provision the L110 tributary blade.
Note: If autoprovisioning is enabled, the L110 tributary blade is automatically provisioned.
Command:
% set eqpt shelf 3 type BDL1-3B11 shelf-mode NORMAL shelf-role TRIB admin-status up
Step 2
Provision the Fan unit slots.
Note: If autoprovisioning is enabled, the Fan unit slots are automatically provisioned.
Commands:
% set eqpt shelf 3 slot FAN1 cardType AC00-F011 admin-status up
% set eqpt shelf 3 slot FAN2 cardType AC00-F011 admin-status up
Step 3
Provision the PIL1-3PS2 PIU equipment.
Note: If autoprovisioning is enabled, the PIL1-3PS2 equipment is automatically provisioned.
Command:
% set eqpt shelf 3 slot 1 cardType PIL1-3PS2 admin-status up
Step 4
Provision a PIL1-3PS2 edge port (E1...E4).
Note: If autoprovisioning is enabled, the PIL1-3PS2 edge ports (E1...E4) are automatically provisioned.
Command:
% set eqpt shelf 3 slot 1 subslot 0 port E1 pluggableInterfaceType Edge admin-
status up num-lanes 128
Note: Repeat this step for each edge port (E1...E4) to be provisioned.
Step 5
Provision a PIL1-3PS2 client port (C1...C16).
Note: If autoprovisioning is enabled, the PIL1-3PS2 PIU client ports (C1...C16) are automatically provisioned.
Command:
% set eqpt shelf 3 slot 1 subslot 0 port C1 pluggableInterfaceType Client admin-
status up num-lanes 128
Note: Repeat this step for each client port (C1...C16) to be provisioned.
· Fujitsu and Fujitsu Customer Use Only
Release 19.1.1 Issue 1.1, May 2021