Fujitsu 1FINITY L100 User Manual page 342

System Maintenance
Trouble Clearing
Entity Type
COM
COM
COM
BDL1-3R11
COM
·
Release 19.1.1 Issue 1.1, May 2021
Service
Severity Direction
affected
minor non–service- n/a
affecting
Probable Cause
Main blade is default.
Secondary software is corrupted.
warning non–service- n/a
affecting
Probable Cause
Secondary software is corrupted.
warning non–service- n/a
affecting
Probable Cause
Secondary software is corrupted.
minor non–service- n/a
affecting
Probable Cause
Secondary storage drive failed; Encryption
password check
major non–service- n/a
affecting
Probable Cause
Main blade software not ready
Location Description
NEND Secondary storage OSL is corrupted.
Suggested Corrective Action
1. Disconnect secondary storage (USB flash drive).
2. Upgrade load of the Main blade to desired load which
supports secondary database feature (Release 2.4 and
later releases).
3. Run ss-overwrite command.
4. Perform WARM restart on Main blade.
5. Clear the secondary OSL corruption alarm.
NEND Database locked: Secondary software
corruption
Suggested Corrective Action
After secondarySoftwareCorruption alarm is cleared, this
database lock condition is cleared.
NEND Database locked: Secondary software
corruption
Suggested Corrective Action
After secondarySoftwareCorruption alarm is cleared, this
database lock condition is cleared.
NEND USB flash drive encryption check failed
Suggested Corrective Action
1. Check whether the USB flash drive is inserted in the
tributary blade. If it is, remove the USB flash drive from
the tributary blade and insert in the Main blade.
2. If the USB flash drive is in the Main blade and an alarm
in present, run request format-usb command to
format the USB flash drive.
NEND Software not ready
Suggested Corrective Action
1. Perform WARM restart.
2. If WARM restart did not clear the alarm, try COLD
restart.
3. If COLD restart did not clear the alarm, replace the
Main blade.
Fujitsu and Fujitsu Customer Use Only
342