Fujitsu 1FINITY L100 User Manual page 307

System Maintenance
Trouble Clearing
Entity Type
100ME
100ME
1GEBT
1GEBT
BDL1-3B11, BDL1-3R11,
1GEX, 1GEBT
·
Release 19.1.1 Issue 1.1, May 2021
Service
Severity Direction
Affected
minor non–service- n/a
affecting
Probable Cause
■ The SFP module installed in the
specified port is mismounted.
■ The SFP module does not match the
port for which it is provisioned.
critical service- n/a
affecting
Probable Cause
■ The SFP module installed in the
specified port is mismounted and has an
interface provisioned on it.
■ The SFP module does not match the
port for which it is provisioned and has
an interface provisioned on it.
warning non–service- n/a
affecting
Probable Cause
■ The SFP module installed in the
specified port is mismounted.
■ The SFP module does not match the
port for which it is provisioned.
minor non–service- n/a
affecting
Probable Cause
■ The SFP module installed in the
specified port is mismounted.
■ The SFP module does not match the
port for which it is provisioned.
major non–service- n/a
affecting
Probable Cause
The interblade communication cables are
not installed correctly.
Location Description
NEND Mismatch of Equipment and Attributes:
TYPE=<unit type>
Suggested Corrective Action
1. Remove and remount the SFP module.
2. Replace the SFP module with the correct SFP module.
NEND Mismatch of Equipment and Attributes:
TYPE=<unit type>
Suggested Corrective Action
1. Remove and remount the SFP module.
2. Replace the SFP module with the correct SFP module.
NEND Mismatch of Equipment and Attributes:
TYPE=<unit type> and the admin-status is
down
Suggested Corrective Action
1. Remove and remount the SFP module.
2. Replace the SFP module with the correct SFP module.
NEND Mismatch of Equipment and Attributes:
TYPE=<unit type>
Suggested Corrective Action
1. Remove and remount the SFP module.
2. Replace the SFP module with the correct SFP module.
NEND Interblade communication Miscabled
Connection: TYPE = <unit type>
Suggested Corrective Action
1. Remove and remount the SFP module.
2. Replace the SFP module with the correct SFP module.
Fujitsu and Fujitsu Customer Use Only
307