Fujitsu 1FINITY L100 User Manual page 288

System Maintenance
Trouble Clearing
INPUT RATING:
-40 TO -57V
,10A MAX，
FUSED AT 15A
Figure 105
Rear View of L110 Optical Mux Base Blade
Note: The Entity Type LED indicators are on the front of the SFP module installed in the corresponding SFP cage.
The FAN LED indicators are on the rear of the blade. All other LED indicators are on the front of the blade.
Note: In a multiblade configuration, consisting of a Main blade and one or more tributary blades, only the ALM
LED on the Main blade lights when an alarm occurs on any of the blades.
Table 49
LED and Condition
LED
SYS
ALM
·
Release 19.1.1 Issue 1.1, May 2021
Color
Green
Yellow
Red
Blinking red
Off
Yellow
Red
Off
Condition
Normal operation
Not ready (warm-up or SWDL in progress)
One of the following alarms is present:
■ databaseCorruption
■ databaseLockedDbRestoreInProgress
■ databaseLockedIlfViolation
■ databaseLockedShelfProvModePresent
■ databaseLockedSoftwareUpgradeInProgress
■ equipmentWarmup
■ firmwareDownloadOrActivationFailure
■ shelfProvisioningMode
■ softwareVersionMismatch
■ databaseVersionMismatch
■ firmwareBackwardCompatibleAll
■ firmwareInitInProgress
■ firmwareVersionMismatch
■ softwareStageInProgress
Equipment fault
Power-up state
MEA
Power off
Minor alarm
Critical or major alarm
No alarm
288
Fujitsu and Fujitsu Customer Use Only