Fujitsu 1FINITY L100 User Manual page 17

or assembly MUST NOT be metallically
connected to interfaces that connect to
the OSP or its wiring. These interfaces
are designed for use as intra-building
interfaces only (Type 2 or Type 4 ports)
as described in GR-1089 an require
isolation from the exposed ODP cabling.
The addition of Primary Protectors is not
sufficient protection in order to connect
these interfaces metallically to OSP
wiring.
■ The 1FINITY L100 and L110 blades and the PIL1-3PS2 PIU are
compliant with the Laser IEC/EN 60825-1, 2 standards.
■ The 1FINITY L100 and L110 blades and the PIL1-3PS2 PIU
comply with 21 CFR Chapter 1, sub-chapter J, Class 1 Laser
Product.
■ The 1FINITY L100 and L110 blades and the PIL1-3PS2 PIU are
compliant with the Class A Emission limits of the following
standards:
• FCC Part 15, Class A
• ICES-003
• CISPR Publication 32 Class A (Europe)
■ The 1FINITY L100 Series blades are approved for the following
product safety regulatory standards:
• UL 60950-1, 2nd Edition, 2014-10-14 (Information
Technology Equipment-Safety—Part 1: General
Requirements)
• CAN/CSA C22.2 No. 60950-1-07, 2nd Edition, 2014-10
(Information Technology Equipment-Safety—Part 1: General
Requirements)
• IEC 60950-1:2005 (Second Edition); Am1:2009 + Am2:2013
• UL 62368-1 2nd Edition: Audio/video, information and
communication technology equipment - Part 1: Safety
requirements
• CAN/CSA C22.2 NO. 62368-1-14 Audio/video, information
and communication technology equipment - Part 1: Safety
requirements
• IEC 62368-1 2nd Edition: Audio/video, information and
communication technology equipment - Part 1: Safety
requirements
• IEC/EN 60825-1 (Safety of laser products—Part 1:
Equipment classification and requirements)
• IEC/EN 60825-2 (Safety of laser products—Part 2: Optical
fibre communication systems [OFCS])
■ The PoE application and cabling is suitable for indoor use only,
and is not suitable for outside applications.
■ The following symbol identifies any terminal intended for
connection to an external conductor for protection against
electrical shock in case of a fault, or the terminal of a protective
earth (ground) electrode.
Figure 1
Protective Earth (Ground) Symbol