Fujitsu 1FINITY L100 User Manual page 379

379
System Maintenance
Equipment Replacement
Figure 126
Seating Adapter
Step 24
Review the position of the power terminal adapter on the blade, verifying that no gap exists between the power
terminal adapter and the blade and that the power terminal adapter is slightly below the top of the blade.
Figure 127
Correcting Power Terminal Adapter Placement
Step 25
On a flat ESD-safe surface, alternately tighten the attachment screws to secure the power terminal adapter onto
the blade, careful not to overtighten them or tighten one screw completely before the other screw.
· Fujitsu and Fujitsu Customer Use Only
Release 19.1.1 Issue 1.1, May 2021