Install Data Communication Network Cabling - Fujitsu 1FINITY L100 User Manual

Equipment Installation

Install Data Communication Network Cabling

4.17
Install Data Communication Network Cabling
Prerequisite:
■ The appropriate SFP modules must be installed in the LCN ports being cabled.
Step 1
Connect the fiber-optic cable from the DCN cloud to the LCN1 port on the Main L100 Blade.
Step 2
Connect a fiber-optic cable from the LCN3 port on the Main L100 Blade to the LCN4 port on the first tributary
blade.
Step 3
Is another tributary blade to be installed?
If YES:
Continue with next step.
If NO:
Proceed to Step 6.
Step 4
Connect a fiber-optic cable from the LCN3 port on the current tributary blade to the LCN4 port on the next
tributary blade.
Step 5
Return to Step 3.
Step 6
Connect a fiber-optic cable from the LCN3 port on the last tributary blade to the LCN4 port on the Main blade.
✓
This task is complete.
·
Release 19.1.1 Issue 1.1, May 2021
154
Fujitsu and Fujitsu Customer Use Only