Enable Osnr For Main Blade - Fujitsu 1FINITY L100 User Manual

255
ROADM Turn-Up and Operations

Enable OSNR for Main Blade

7.2

Enable OSNR for Main Blade

Note: By default, the OSNR is disabled for a Main blade.
Step 1
Enter configure mode.
Command:
> configure
Step 2
Enable OSNR for all blades in NE.
Note: OSNR setting must be enabled in L100 Blade to support interoperability with L130 Blade.
Command:
% set wdmcfg osnr enable
Step 3
Save the changes.
Command:
% commit
Step 4
Verify OSNR settings.
Command:
% show wdmcfg osnr
Output:
osnr enable
✓
This task is complete.
· Fujitsu and Fujitsu Customer Use Only
Release 19.1.1 Issue 1.1, May 2021