Fujitsu 1FINITY L100 User Manual page 114

114
Equipment Installation
Install 23-Inch, 2-Post Rack Rail Kit
Left Bracket
Right Bracket
Nuts
Rear Flange
Front Flange
Figure 39
Loosening Flange Nuts 23-Inch, 2-Post Rack Bracket
Step 3
Adjust the width between the front flange and rear flange (on both brackets) to the width of the rack.
Step 4
Use the front flange on each bracket to attach the brackets to the front of the rack at the required position, as
shown in the following figure.
Note: Do not completely tighten the bolts, the bolts are completely tightened later in the procedure.
· Fujitsu and Fujitsu Customer Use Only
Release 19.1.1 Issue 1.1, May 2021