Set Up Tributary Blade With Auto Shelf Id Assignment Enabled - Fujitsu 1FINITY L100 User Manual

189
Initial System Turn Up

Set Up Tributary Blade with Auto Shelf ID Assignment Enabled

5.10
Set Up Tributary Blade with Auto Shelf ID Assignment Enabled
Prerequisite:
■ Verify that tributary blade is in shelf provisioning mode.
Step 1
Log on the Main blade.
Step 2
Verify whether tributary auto shelf ID assignment is enabled.
Command:
> show system trib-shelfid-assignment
Step 3
Clear the list of USIs of the tributary blade.
Command:
% request flush-shelf-prov-mode-blades
Step 4
Apply power to the tributary blade.
Step 5
Plug in all LCN SFP (to the Main and tributary blades) and connect the interconnect LAN cables.
Step 6
List the USI of the tributary blade.
Command:
> show shelf-prov-mode-blades
Output:
USI LBFJTU011725463R110100xxx shelf-id 0
Step 7
Set the desired shelf ID on the tributary blade manually.
Command:
> request set-shelf-id USI LBFJTU011725463R110100002 shelf-id 2
Step Result:
The tributary blade restarts and autoprovisions with the new shelf ID.
· Fujitsu and Fujitsu Customer Use Only
Release 19.1.1 Issue 1.1, May 2021