Fujitsu 1FINITY L100 User Manual page 388

System Maintenance
Equipment Replacement
PIU Slots
Closed
Figure 136
Latching Fiber Restraint Gate
Step 9
At the front of the blade, use the fiber management arms to slowly pull the blade out of the rack to the locked
position.
At the locked position, the locks on both sides of the blade stop the blade at approximately halfway out.
Attention: Do not touch the optical fibers in adjoining slots. Make sure fibers from other blades do
not obstruct the blade being removed.
·
Release 19.1.1 Issue 1.1, May 2021
Fiber Restraint
Gate
Set Screw
Open
388
Fujitsu and Fujitsu Customer Use Only