Fujitsu 1FINITY L100 User Manual page 18

Compliance Information—
L160-Specific
L160 UL Labels
1FINITY™ L160 BDL1-3M21
MODEL FC95453M21
Iss. 01
FC95453M21 Iss. 01
PART NO.
LBFJTU291865453M2101H0001
SER NO. H0001 DATE YYYY–M
QR
FUJITSU LIMITED
MADE IN CHINA
CAUTION:
THIS EQUIPMENT HAS DUAL 48V INPUTS.
BOTH MUST BE DISCONNECTED TO
DE-ENERGIZE EQUIPMENT.
ATTENTION:
ÉLECTRIQUE. CET ÉQUIPEMENT REÇOIT
PLUSIEURS ALIMENTATIONS. COUPER
HOLD HERE LE COURANT AVANT Ľ ENTRETIEN.
UL Fuse Ratings
Model/Type Reference
L160 (BDL1-3M21)
General Compliance
■ NEBS Level 3:
• GR-63-CORE Issue 05 (including Seismic Zone 4
requirements)
• GR-1089-Electromagnetic Compatibility (EMC) and Electrical
Safety
• GR-3108-Class 1-Equipment in the Outside Plant (OSP)
■ GR-1089, Section 9 (Bonding and Grounding) required
installation standards:
• Installed in a Common Bonding Network (CBN)
• Installed in NEBS Level 3 environments, for example, Central
Offices as well as Customer Premise Environment (CPE)
• Installed in accordance with a DC-C or DC-I configuration
■ GR-1089, R4-16, R4-18 (Intra-Building Lightning Protection)
Warning: All metallic signaling cables
should be shielded with the shield
grounded at both ends to meet intra-
building lightning requirements.
Warning: The intra-building port(s)
(UTLP1, UTLP2, and MAINT) of the
equipment or subassembly is suitable for
connection to intra-building or
unexposed wiring or cabling only. The
intra-building port(s) of the equipment
or assembly MUST NOT be metallically
connected to interfaces that connect to
the OSP or its wiring. These interfaces
Micro PDF417
WOMSW10DRA
MOLEX
Manufactured
Molex PN: 1835260000
2019, November
FUJITSU PN: TA09068–C130
CAUTION:
RISK OF ELECTRIC SHOCK. HAZARD LEVEL 1M LASER RADIATION.
DO NOT VIEW WITH NON-ATTENUATING OPTICAL
INSTRUMENTS.
ATTENTION:
RISQUE DE CHOC NIVEAU DE RISQUE DE
RAYONNEMENT LASER 1M NE
PAS. REGARDER DIRECTEMENT SANS
MOLEX, LLC CAN ICES-3 (A) /NMB-3 (A)
46360 Fremont Blvd,
Fremont, CA 94538. USA
TO BE INSTALLED ONLY IN RESTRICTED
Complies with 21 CFR 1040.10 and ACCESS LOCATIONS IN ACCORDANCE WITH
1040.11 except for conformance
THE NEC, CAN ICES-3A AND ANSI/NFPA NO. 70.
with IEC 60825-1 Ed. 3, as described
in Laser Notice No. 56, dated
MATERIEL À INSTALLER UNIQUEMENT DANS DES
CAUTION:
May 8, 2019.
LIEUX À ACCÈS RESTREINT CONFORMÉMENT À LA
SEE INSTALLATION
Class I Laser Product
NORME NEC, CAN ICES-3A ET ANSI/NFPA NO. 70.
MANUAL BEFORE
Conformé à 21 CFR
INSTALLING.
CONDITIONS OF ACCEPTABILITY:
THIS EQUIPMENT COMPLIES WITH PART 15 OF THE
ATTENTION:
FCC RULES. OPERATION IS SUBJECT TO THE
VOIR MANUEL
FOLLOWING CONDITIONS:
D' INSTALLATION (1) THIS MAY NOT CAUSE HARMFUL INTERFERENCE AND
AVANT (2) THIS MUST ACCEPT ANY INTERFERENCE
RECEIVED INCLUDING INTERFERENCE
Ľ INSTALLATION.
THAT MAY CAUSE UNDESIRED OPERATION.
19.8 lb
Weight:
9.0 kg
19.8 lb
Poids:
9.0 kg
Rating
–48 V DC
■ UL/CSA 62368-1
■ The 1FINITY L160 Blade is compliant with the Laser IEC/EN
60825-1, 2 standards.
■ The 1FINITY L160 Blade is compliant with 21 CFR 1040.10 and
1040.11 except for conformance with IEC 60825-1 Ed. 3., as
described in Laser Notice No. 56, dated May 8, 2019., Class 1
Laser Product.
■ The 1FINITY L160 Blade is compliant with the Class A Emission
limits of the following standards:
• FCC Part 15, Class A
• ICES-003
• CISPR Publication 32 Class A (Europe)
■ The 1FINITY L160 Blade is approved for the following product
safety regulatory standards:
• CAN/CSA-C22.2 No. 62368-1/UL 62368-1, 2nd Edition,
2014-12-01 (Audio/video, information and communication
technology equipment—Part 1: Safety requirements)
• IEC 60950-1:2005 (Second Edition); Am1:2009 + Am2:2013
• IEC 62368-1:2014 (Modified) (Audio/video, information and
communication technology equipment—Part 1: Safety
requirements)
USE COPPER CONDUCTORS ONLY.
HOLD HERE
are designed for use as intra-building
interfaces only (Type 2 or Type 4 ports)
as described in GR-1089 and required
isolation from the exposed ODP cabling.
The addition of Primary Protectors is not
sufficient protection to connect these
interfaces metallically to OSP wiring.