Fujitsu 1FINITY L100 User Manual page 393

393
System Maintenance
Equipment Replacement
Step 18
Pull the power terminal adapter up and away from the blade.
Figure 144
Pulling Power Terminal Adapter
Step 19
Before unpacking the replacement blade, inspect the shipping containers for signs of damage.
Note: Claims for shipping damage must be filed with the transportation company in accordance with their
published procedure. Contact Fujitsu Sales Representative for any shipment questions.
Step 20
Unpack and carefully remove the replacement blade from its shipping container and place it on a clean, level,
and ESD-safe surface. Use two hands as shown in the following figure to remove a blade unit from container.
Note: Leave the blade in the ESD-protective plastic bag until ready for installation.
· Fujitsu and Fujitsu Customer Use Only
Release 19.1.1 Issue 1.1, May 2021