Fujitsu 1FINITY L100 User Manual page 121

121
Equipment Installation
Install 19-Inch, 4-Post Rack Rail Kit
Figure 47
Attaching Front Flange 19-Inch, 4-Post Rack Bracket
Step 5
Use the rear flange on each bracket to attach the brackets to the rear of the rack at the required position, as
shown in the following figure.
Note: Do not completely tighten the bolts, the bolts are completely tightened later in the procedure.
Figure 48
Attaching Rear Flange 19-Inch, 4-Post Rack Bracket
· Fujitsu and Fujitsu Customer Use Only
Release 19.1.1 Issue 1.1, May 2021