Fujitsu 1FINITY L100 User Manual page 236

System Administration
Provision Proxy-ARP
Parameter
interface name
type
enabled/disabled
true/false
ip_address
netmask address
Command Example:
% set interfaces interface ip-1/0/0/LCN1 type ip ipv4 enabled forwarding true
address 10.25.25.100 netmask 255.255.255.0
Note: Disable client IPv4 over LCN1 IP interface.
Step 5
Set NEM IP address for the GNE.
Command:
% set interfaces interface ip-1/0/0/NEM type ip ipv4 forwarding true address
10.25.25.100 prefix-length 32 preferred true
Step 6
Set NEM IP address for the RNE.
Command:
% set interfaces interface ip-1/0/0/NEM type ip ipv4 forwarding true address
10.25.25.100 prefix-length 32 preferred true
Step 7
Provision the E-SC-E1 port equipment.
Command:
% set eqpt shelf 1 slot 0 subslot 0 port E-SC-E1 pluggableInterfaceType 1GEX admin-
status up
Step 8
Enable Ethernet and line rate on the E-SC-E1 port.
Command:
% set interfaces interface eth-1/0/0/E-SC-E1 type ethernetCsmacd ethernet speed
1000 admin-status up
·
Release 19.1.1 Issue 1.1, May 2021
Value
<ip-1/0/0/LCN1>
<ipv4>
<Enabled, Disabled>
<True, False>
<1xx.xxx.xxx.xxx>
<1xx.xxx.xxx.xxx>
Description
Name of IP interface instance
Type of IP interface
Enabled—Enable IPv4
Disabled—Disable IPv4
True—Enable forwarding
False—Disable forwarding
IP address of the LCN interface
Subnet mask address
236
Fujitsu and Fujitsu Customer Use Only