Fujitsu 1FINITY L100 User Manual page 416

416
System Maintenance
Backup and Restore
Prerequisites:
■ Clear all alarms and standing conditions being reported on the blade.
■ The user must be logged on as fujitsu/1finity or have Level-4 or Level-5 privileges assigned to perform this
procedure.
As part of database restore for the secondary database, when a new database is accepted, the CDSF content is
updated. The user does not have access to the CDSF database which is distinctive from access to the NE
database. The NE does not back up the CDSF storage as a part of NE database backup procedures to an external
host.
The NE supports non-volatile storage of critical data that is distinctive from the data stored in the NE provisioning
database. The storage facility used by the CDSF is distinct from the storage used by the NE database to such an
extent that any corruption of the NE database does not cause a corruption of the data stored in the CDSF
database.
Step 1
Retrieve the current alarms status on the blade.
Command:
> show alarms alarm-list
Step 2
Transfer the database to the directory of the blade.
/var/ftp
Command:
> request transfer ftp action download local-file-path /var/ftp/1FINITY-XXXXXX.dbs
remote-file-path ftp://anonymous:anonymous@192.168.1.2/1FINITY-XXXXXX.dbs
Step 3
Restore the database.
Command:
> request db-restore filename 1FINITY-XXXXXX.dbs sysNameCheck true
Output:
status database Restore Complete from /var/ftp/1FINITY-071716.dbs
[ok][2016-07-20 14:23:26]
Step 4
Activate the database.
Command:
> request db-activate rollBackTimer 00-20-00
Output:
status database Activate Complete
[ok][2016-01-07 14:26:26]
Note: The blade restarts when a new database is activated.
· Fujitsu and Fujitsu Customer Use Only
Release 19.1.1 Issue 1.1, May 2021